TOTAL CLEAN 750
THE SMALLER TOTAL CLEAN SYSTEM

DEL’S patented Total Clean System is the most valuable component of any dredge dewatering project besides the dredge itself.  On most dredging projects the Total Clean System will remove and dewater 60% or more of the dredged material and at a cost much less than any other dewatering method. Realizing the need for a smaller, more compact dewatering system, DEL developed the Total Clean 750 for flow rates up to 750 GPM. With its small footprint, the 750 is ideal for smaller projects where space is limited.

---

---

ADVANTAGES OF THE TOTAL CLEAN 750

• The Total Clean can be used in conjunction with other dewatering methods such as geotubes, filter presses, belt presses, centrifuges, sand filters, etc. in order to produce a "drinking water" clear effluent if necessary.
• Solids removed are dry enough to pass paint filter test and haul off immediately.
• Sizing of material can be accomplished in order to recover or recycle valuable resources.
• Dewaters more material faster than any other system.
• Can handle flow rates that other dewatering methods cannot.
• Cost less than geotubes and Polymers in most cases.
• No Polymers needed.
• Very mobile, can be setup in a matter of hours.
• Only requires one operator.
• Very small foot print required.
• Extremely quiet operation, suitable for sensitive residential areas.
• Recover material as fine as 400 Mesh.
• Typically we see 75-85% dry solids coming off the shakers.
• Uses: Sand and Silt, Coal, Carbon Fines, Coke Fines, Cat Fines, Fly Ash, Bottom Ash, Hog Waste and much more!

Total Clean 750 Brochure