(800) GO - Tanks

(800) 468 - 2657  

Photos & Videos

The following 8 minute video is a demonstration of how well the Patented Total Clean System works.  This video will demonstrate rapid dewatering of Sand, Silt, Coal, and Carbon with flow rates ranging from 800 GPM to 3000 GPM.  Even at these flow rates this system will give you  up to 85%  dry solids depending on the type of material, a tough task for competitors especially with material as small as 400 Mesh.

Total Clean Demonstration Video

This following Sand Cleaning video shows how (1) Large Total Clean was utilized to handle flow rates of up to 3000 gpm. The dredged slurry consisted of sands, silts and organics and was being removed from a recreational lake in Florida.  The sands that were removed from the slurry were being stockpiled and reused in the park area. The set up of the unit consisted of (1) scalping shaker and (4) desanding hydro-cyclone units. The first three units handled the bulk of the sand load while the 4th unit primarily handled the finer material.

Total Clean Sand Cleaning Video