Rental, Sales and Manufacturing of

Dewatering, Solids Control & Material Handling Equipment

Total Clean System

Del Tank & Filtration Total Clean Systems (*Patented) are used for the removal of solids from slurries that are common in the Dredging, Oilfield, HDD, and Microtunneling industries. It has proven highly efficient in contaminated sediment dredging projects where high volumes of sand must be removed and dewatered. Multiple units can be utilized in series or parallel to achieve maximum solids removal at flow rates in excess of 3000 gpm.  How does the Total Clean System work?

Total Clean Advantages

 

No polymers required	Extremely quiet	Solids pass paint filter test
Use with other dewatering methods	Sizing/Washing of material can be accomplished to recycle valuable resources	Dewaters more material faster than any other system
Only requires one operator	Very mobile, setup in hours	Small foot print required
Works on Digester Cleaning	Works on Tank Cleanings	Works on Hog Waste
Haul off material immediately	Achieve 75-85% dry solids	Dewater down to 35 Microns

Have you recently asked yourself any of these dewatering questions?

• How can I save money on my current dewatering process?

• Where do I start on determining the best way to solve my solids separation and dewatering problems?  

• Can I combine multiple dewatering methods to provide the best possible solution?  

• How can I make multiple particle size separations?

• Can I produce a clean sand for re-use?

• Our digester has a lot of hairs and fibers, how can I deal with those?

• How can I remove the solids from the slurry and produce an effluent that meets the required discharge specifications?

If so, you need to call (800) GO-Tanks or REQUEST MORE INFO

TCW-3000 Product Brochure

Dimensions:  25' W X 52' L

Flow Rates:  Up to 3000 GPM

Setup Time:  (1) Day with good crane operator

Performance:  Cleans 2 to 4 times the Feed Rate

Solids:  75-85% Dry Solids coming off the shakers.

TCS-1500 Product Brochure

Dimensions:  15'-9" W X 39' L

Flow Rates:  Up to 1500 GPM

Setup Time:  Half a day with a good crane operator

Performance:  Cleans 2 to 4 times the Feed Rate

Solids:  75-85% Dry Solids coming off the shakers.

For reference to how small that is, 400 Mesh is equal to 400 holes per square inch. 

VIDEO - Demonstration of the Total Clean System at work

VIDEO - Marina Del Rey Sand Dewatering Project - Beneficial Reuse

TCW-3000 Plus Total Clean System

• Can handle flow rates up to 4500 gpm

• (2) 4 Panel DELineator Scalping Shakers

• (5) 4 Panel DELineator Desanders with (3) 10" Krebs gMax Hydrocyclones each

• Run systems in parallel to handle flow rates in excess of 9,000 gpm

• Only requires 2 Operators

January and February News!!

We are excited to announce the setup of (2) TCW-3000 Plus Systems in parallel on a river dredging project.  Setup in parallel, these units will handle sand slurries in excess of 8,000 GPM while capturing fines as small as 400 mesh and still achieve 75-85% dry solids.